Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V - Université Toulouse III - Paul Sabatier - Toulouse INP Accéder directement au contenu
Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2018

Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V

Nawel Glaa
  • Fonction : Auteur
Redouane Zitoune

Résumé

Cutting forces are critically important in cutting operations because they correlate strongly with cutting performance such as surface accuracy, tool wear, tool breakage, cutting temperature, self-excited, and forced vibrations. The drilling operation of titanium alloys is considered by manufactures as complex and difficult in view of the mechanical and thermal properties of this material. In fact, titanium has a very small coefficient of conduction which leaves a high temperature at the area of contact between the tool and the workpiece, which decreases the cutting forces and increases the wear of the tool. For this, more research has focused on the prediction of cutting forces during the drilling of titanium in order to improve the machinability of this material as well as the wear of the tool. Many efforts have been made by researchers to better understand the drilling process and to formulate theoretical cutting forces models to predict and to simulate the phenomenon. This paper presents a numerical model for prediction of cutting forces and torque during a drilling operation including the effect of the regenerative chatter and of the cutting process damping. The corresponding algorithm allows understanding the interaction between the tool and the workpiece and identifying numerically the three-dimensional evolution of the cutting force components and cutting torque generated by the drilling process of a titanium alloy. Verification tests are conducted on a vertical machine for titanium alloy Ti6Al4V and the effectiveness of the model and the algorithm is verified by the good agreement of simulation result with that of cutting tests under different cutting conditions.
Fichier non déposé

Dates et versions

hal-01940487 , version 1 (30-11-2018)

Identifiants

Citer

Nawel Glaa, Kamel Mehdi, Redouane Zitoune. Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V. International Journal of Advanced Manufacturing Technology, 2018, 96 (5), pp.2815-2824. ⟨10.1007/s00170-018-1758-7⟩. ⟨hal-01940487⟩
44 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More